Skip to content
Need help? Call us at 416-740-2424

Carter-Hoffmann hotLogix HL1-18 36-Pan Non-Insulated Heated Holding Cabinet - 120V/1,750W

Contact Us for Pricing? Please fill out the form below to receive a personalized quote.
* Email:
Shipping Address:

Need Help?
Contact one of our experts.

Product Overview

  • Recessed manual dial control for easy temperature setting; digital thermometer
  • Removable, bottom mounted blower heater, capable of heating to 190°F (88°C); pre-heat to 160°F (71°C) in approximately 30 minutes
  • Single wall, non-insulated aluminum construction; .063 exterior with 2V finish; .125 natural aluminum base frame
  • Single-pane, tempered glass door set in extruded aluminum frame with santoprene gasket; heavy-duty edge mounted, chrome-plated latch with magnetic catch
  • 5” diameter casters with rubber tread, all-swivel, two fitted with brakes; adjustable edge mount hinges with chrome plate finish
  • Adjustable, removable tray racks with universal wire slides; fixed pacing at 3”
  • Accommodates 12”x20”x2.5” steam table pans, 18”x26” sheet pans and GN 2/1 or 1/2 pans
Description

hotLOGIX HL1 Series Heated Food Holding Cabinets are designed to hold cooked food warm and ready for serving. They are constructed of lightweight, sturdy aluminum and feature a removable bottom-mounted heating module with recessed dial control. They come in under-counter, half height, ¾ height and full height.

hotLOGIX holding cabinet with fixed wire slides for 12”x20”x2.5” or 18”x26” pans on adjustable, removable racks. Aluminum interior and exterior, single wall, non-insulated construction with removable blower heating module. Capable of heating to 190°F (88°C). 5” diameter rubber casters; 2 with brakes. Single panel tempered glass door with magnetic latch. Single electric connection, 120 volts, 1750 watts,15.0 amps, 60 Hz, single phase, eight foot rubber cord with grounding plug, NEMA 5-20P.

Specifications
Specifications
Model HL1-18
Width 24.68 Inches
Depth 29.5 Inches
Height 70.62 Inches
Pan Capacity (36) 12" x 20"
(18) 18" x 26"
Inside Working Height 54.5 Inches
Caster Diameter 5 Inches
Voltage 120V, 1 Ph, 60Hz
Power Comsumption 1750 Watts
Amperage 15.0 Amps
Connection Single
Product Type Holding Cabinet
  • ETL Certified Determined through independent testing and periodic follow-up inspections by NRTL. This item meets North American product safety standards and published industry standards.
  • ETL Sanitation List This item demonstrates compliance to North American sanitation standards
  • Made in America This product was made in United States of America.
  • 5-20P This product comes with a NEMA 5-20P plug.
  • Files